Association between Oral Health and Depressive Symptoms in Chinese Older Adults: The Mediating Role of Dietary Diversity.

Diet is a modifiable factor in healthy population aging. Additionally, oral health and diet are important factors affecting depressive symptoms. To assess the mediating role of dietary diversity (DD) in oral health and depressive symptoms in older adults, we selected 8442 participants aged ≥ 65 years from the 2018 Chinese Longitudinal Health Longevity Survey (CLHLS) for a cross-sectional study. Depressive symptoms were determined based on scores on the 10-item Center for Epidemiologic Studies Depression Scale (CESD-10). Dietary diversity scores (DDS) were established based on the frequency of intake of food groups. Oral health was measured by denture use and toothbrushing frequency. Stepwise multiple linear regression and PROCESS macros were used for mediated effects analysis and testing. The sample had a positive detection rate of 44.1% for depressive symptoms, 40.8% for denture use, and 41.9% for once-a-day toothbrushing. Denture use (ρ = -0.077, p < 0.01) and toothbrushing frequency (ρ = -0.115, p < 0.01) were negative predictors of depressive symptoms in older adults. DD significantly mediated the association between denture use (indirect effect -0.047; 95%CI: -0.068-0.028; p < 0.001), toothbrushing frequency (indirect effect -0.041; 95%CI: -0.054-0.030; p < 0.001), and depressive symptoms. Denture use and toothbrushing frequency not only directly reduce the risk of depressive symptoms in older adults, but also indirectly affect depressive symptoms through DD.

Anti-biofilm effectiveness of protocols for cleaning complete dentures in hospitalized patients: a randomized controlled trial.

BACKGROUND: Denture biofilm acts as a potential reservoir for respiratory pathogens, considerably increasing the risk of lung infections, specifically aspiration pneumonia, mainly 48h after hospital admission. The establishment of a straightforward, affordable, and applicable hygiene protocol in a hospital environment for the effective control of denture biofilm can be particularly useful to prevent respiratory infections or reduce the course of established lung disease. OBJECTIVES: To evaluate the anti-biofilm effectiveness of denture cleaning protocols in hospitalized patients. METHODOLOGY: The maxillary complete dentures (MCDs) of 340 hospitalized participants were randomly cleaned once using one of the following 17 protocols (n=20): brushing with distilled water, toothpaste, or neutral liquid soap (controls); immersion in chemical solutions (1% sodium hypochlorite, alkaline peroxide, 0.12% or 2% chlorhexidine digluconate), or microwave irradiation (650 W for 3 min) combined or not with brushing. Before and after the application of the protocols, the biofilm of the intaglio surface of the MCDs was evaluated using two methods: denture biofilm coverage area (%) and microbiological quantitative cultures on blood agar and Sabouraud Dextrose Agar (CFU/mL). Data were subjected to the Wilcoxon and Kruskal-Wallis tests (α=0.05). RESULTS: All 17 protocols significantly reduced the percentage area of denture biofilm and microbial and fungal load (P<0.05). The highest percentage reductions in the area of denture biofilm were observed for 1% hypochlorite solution with or without brushing and for 2% chlorhexidine solution and microwave irradiation only in association with brushing (P<0.05). The greatest reductions in microbial and fungal load were found for the groups that used solutions of 2% chlorhexidine and 1% hypochlorite and microwave irradiation, regardless of the association with brushing (P<0.05). CONCLUSIONS: A single immersion for 10 min in 1% sodium hypochlorite, even in the absence of brushing, proved to be a straightforward, rapid, low-cost, and effective protocol for cleaning the dentures of hospitalized patients.

Effect of various staining beverages on the color stability of CAD/CAM PMMA denture teeth: An in vitro study.

OBJECTIVE: This study aimed to compare the color change of computer-aided design (CAD)/computer-aided manufacturing (CAM) polymethyl methacrylate (PMMA) denture teeth and conventional acrylic teeth after immersion in three staining beverages (coffee, red tea, and cola) for a day, 7 days, and 30 days. MATERIALS AND METHODS: Group 1: Conventional acrylic teeth (n = 32). Group 2: Milled CAD/CAM teeth out of PMMA disc (n = 32). The specimens of each material were further divided into four subgroups: (1) Control group, distilled water (n = 16). (2) Red tea solution (n = 16). (3) Coffee solution (n = 16). (4) Cola (n = 16). The color change ( ∆ E $\unicode{x02206}E$ ) was assessed using a spectrophotometer at four time points: at the baseline (t0 ), on the 1st day (t1 ), on the 7th day (t2 ), and the 30th day (t3 ) of immersion. Kolmogorov-Smirnov test was applied, followed by performing independent samples t test, one-way analysis of variance and post-hoc Tukey tests to compare the color change values at different time points. RESULTS: The mean score of NBS values of the coffee solution indicates perceivable color change at the end of the 30th day in the conventional acrylic teeth group. It was 0.843 ± 0.395 at t1 , then increased to 1.017 ± 0.477 at t2 and to 2.259 ± 1.059 at t3 . There is a statistically significant difference (p < 0.05) in color change values between both tooth types at the end of the 30th day of immersion in red tea solution and a statistically significant difference at the end of the 7th day (p < 0.05) and the 30th day (p < 0.05) of immersion in coffee solution. CONCLUSIONS: CAD/CAM PMMA teeth are more color stable than conventional acrylic teeth after 30 days of immersion in coffee and red tea solution.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin.

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.

Relationship between oral health and depression: data from the National Health Survey 2016-2017.

OBJECTIVE: To evaluate the relationship between oral health status, self-perception of oral health, and depression. METHODS: This cross-sectional study included 2953 individuals that were ≥ 18 years of age and participated in the Chilean National Health Survey (NHS), 2016-2017. Information on oral, dental, and mental health, and the presence or absence of depressive symptoms was collected. Secondary data analysis was carried out using STATA and included logistic regression models adjusted for sex, age, and educational level. The analyses factored in the expansion weights to estimate representative prevalences of the entire population. RESULTS: Participants experiencing frequent dental or prosthesis-related discomfort while speaking (OR: 1.57; 95% CI: 1.01-2.43) were related with exhibiting suspected depression. Removable upper denture users were at a higher risk of exhibiting suspected (OR: 2.04; 95% CI: 1.11-3.74) than those not using them. Participants diagnosed with depression in the past 12 months had a similar number of teeth (median = 24) compared to those without depression (median = 25) (OR: 0.99; 95% CI: 0.96-1.02). CONCLUSION: Experiencing dental or prosthesis-related difficulties in speaking is related to suspected depression or a diagnosis of depression. These findings highlight the importance of developing comprehensive healthcare approaches that consider mental health in the context of oral health.

Unveiling denture-induced oral lesions: A comprehensive study on classification and pain assessment.

BACKGROUND: Denture-induced oral Lesions (DIOLs) often manifests shortly after the placement or adjustment of new or realigned dentures, frequently resulting in severe pain and discomfort. OBJECTIVES: This study aimed to classify DIOLs placing a particular emphasis on assessing the associated pain. METHODS: A prospective case study was conducted involving 126 patients who were fitted with a total of 193 dentures of various types at the Hadassah School of Dental Medicine. All patients underwent comprehensive intra-oral examinations within 1-8 weeks following denture delivery, completed symptom questionnaires and had their medical records reviewed. Key variables documented included age, gender, overall health status, denture type, and a detailed description of the DIOLs. The description encompassed factors such as lesion location, shape, colour, size, border characteristics, ulcerative appearance, membrane coverage, 3D morphology (elevated, immersed and flat) and patient-reported Verbal Pain Score (VPS) when touching the DIOLs, when wearing the denture, and when not wearing the denture. RESULTS: Notably, 25.4% of denture wearers required no adjustments, while 14.4% necessitated more than three revisions. A majority (71.8%) of DIOLs cases were associated with mandibular complete dentures, primarily situated on the alveolar ridge. The mean VPS indicated a pain intensity of 7 ± 2.1, with temporary dentures in both jaws causing the most discomfort. Implant-supported overdentures were particularly painful when placed in the mandible. Additionally, VPS scores were higher among older individuals and those with prior prosthetic experiences. A significant correlation was observed between pain intensity and presence of chronic health condition (0.036). CONCLUSIONS: This study revealed distinct characteristics of DIOLs and highlighted the multifactorial nature of pain experienced following the development of DIOLs. Insights into the influence of patient and denture characteristics on DIOLs and pain intensity can guide healthcare professionals in optimising patient comfort and satisfaction.

[Clinical analysis of denture rehabilitation after mandibular fibula free-flap reconstruction].

OBJECTIVE: To evaluate the postoperative denture restoration and denture function in patients with mandibular defect reconstructed with vascularized free fibula flap. METHODS: In the study, 154 patients who underwent mandibular segment resection and used vascularized free fibula flap to repair mandibular defects due to inflammation, trauma and tumor from January 2015 to December 2020 were collected. These patients had common inclusion criteria which were stable occlusal relationship before operation, segmental defects of mandibular bone caused by lesions of mandible and adjacent parts (such as floor of mouth, tongue, cheek), free fibula flap used for repair and surviving after operation. Relevant data were reviewed and situation of denture restoration was followed up. A questionnaire related to denture functional evaluation had been proposed for those who had completed the denture rehabilitation. The evaluation index of denture restoration function was assigned by expert authority to obtain the denture function score. SPSS 18.0 software was used for statistical analysis of the basic information of the patients included in the study and the denture restoration of the patients. RESULTS: The rate of postoperative denture restoration in the patients with mandibular defects repaired by free fibula flap was 17.5%, and the rate of postoperative denture restoration in the patients with benign mandibular tumors was 25.0% (18/72), which was significantly greater than that in the patients with malignant tumors 11.0% (9/82, P < 0.05). There was no significant difference in denture function score between the patients with condylar defect and those without condylar defect in denture repair rate and denture function score (P>0.05). The functional score of implant denture was significantly greater than that of removable denture (P < 0.05). According to Brown classification, the denture function score of the patients with the defect invo-lving the anterior mandibular region was significantly greater than that of the patients without the anterior mandibular region involved (P < 0.05). The poor oral conditions, such as less amount of remaining teeth, insufficient retention strength, large mobility of soft tissue in the surgical area, poor oral vestibular groove condition became the main reason of not receiving denture restoration (37.86%). CONCLUSION: The denture rehabilitation of mandibular defect reconstructed with vascularized free fibula flap is closely rela-ted to pathological properties and oral conditions. The clinical outcome of implant denture has been confirmed effectively and it is a better choice for future denture restoration after mandibular reconstruction.

A New Scale for Rating Oral Health-Related Quality of Life in Denture Wearers.

PURPOSE: When carrying out prosthetic rehabilitation of edentulous and partially edentulous patients, great attention is paid to the personal attitude of the patients, their satisfaction with oral health and psychosocial interaction due to tooth loss, as well as the treatment of the resulting disorders. This attention has led to the development of various instruments for examining the quality of life related to oral health. The aim of this study was to develop and validate a reliable instrument in the Serbian language suitable for measuring oral health-related quality of life in patients who have been rehabilitated with complete or partial dentures. Мaterials and Methods: The study was unicentric and cross-sectional, and assessed the reliability and validity of a newly developed instrument for measuring the oral health-related quality of life in denture wearers (OHRQoL-DW). It was conducted on a sample of 200 adults from Serbia, wearers of various types of dentures, with a mean age 66.9 ± 10.3 years and male/female ratio of 86/114 (43%/57%). RESULTS: The definitive version of the OHRQoL-DW scale with 28 items showed very good reliability, with Cronbach's alpha = 0.938. Good temporal stability of the questionnaire was demonstrated, and satisfactory results were obtained for divergent and convergent validity tests. Exploratory factorial analysis revealed four domains of oral health-related quality of life in denture wearers: physical, psychosocial, environmental and aesthetic. CONCLUSIONS: The OHRQoL-DW scale is a reliable and valid generic instrument for measuring the oral health-related quality of life in patients wearing dentures, which is one of the most important outcomes of oral health in prosthetic treatment.

Use of T-Scan III in analyzing occlusal changes in molar fixed denture placement.

BACKGROUND: This study aims to analyze the longitudinal variation of occlusal force distribution prior to and after fixed restoration for molar full-crowns with T-SCAN III which provide reference for occlusal adjustment and long-term maintenance. METHODS: We enrolled a total of 20 patients who received conventional restorative treatment for molars. The occlusion examination was conducted in 3 stages (before placement, immediately after placement, and 3 months after placement) using T-SCAN III (Tekscan South Boston, MA, USA, 10.0) to examine and measure the occlusal contact areas of the full dentition. RESULTS: The results indicated that the occlusal force distribution in the molar region of the patients changed before and after the fixed restoration, but the percentages of occlusal force in the dental arch of the molar did not differ significantly before and after the restoration (P > 0.05). Three months after the fixed restoration, the percentage of occlusal force in the restored dental arches of lateral teeth increased significantly (P < 0.05). CONCLUSION: The results of this study indicated that the occlusal forces of the patients changed with tooth movement and adaptation, which is mainly reflected in the increasing occlusal force. Quantitative occlusal force analysis using T-SCAN III occlusal analyzer can provide more objective and accurate data to effectively guide clinical occlusion adjustments.

In vitro comparison of antifungal activity of conventional alcohol sprays and antimicrobial photodynamic therapy on acrylic denture resin.

BACKGROUND: Traditionally, alcohol sprays are used for disinfection of acrylic-base denture surfaces. A limited number of studies have assessed the role of antimicrobial photodynamic therapy (aPDT) in this regard; however, it remains debatable whether conventional alcohol sprays are superior to aPDT in terms of antifungal activity or vis versa. OBJECTIVE: The aim of the present in vitro study is to compare the antifungal activity of conventional alcohol sprays and aPDT on acrylic denture resin. METHODS: Individuals wearing complete dentures at least on one arch were included. Dentures were randomly divided into three groups. Groups 1-3 were disinfected with an alcohol-based antiseptic spray and aPDT, respectively. Assessment of oral yeast growth was done using swab samples. The culture mediums were incubated at 37∘C for 72 hours and viewed through a microscope. The numbers of colony forming units (CFU/ml) were determined. P< 0.05 were considered statistically significant. RESULTS: At baseline, the mean CFU/ml in Groups 1-3 were comparable. After disinfection, a statistically significant reduction in microbial CFU/ml was observed in Groups 1 (P< 0.05) and 2 (P< 0.05) compared with baseline. In Group 3, there was no difference in CFU/ml throughout the study. After disinfection, there was no difference in microbial CFU/ml in dentures in Groups 1 and 2. CONCLUSION: Conventional alcohol sprays are as effective as aPDT towards reducing oral yeasts CFU/ml on acrylic denture resin.

Denture Plaque Biofilm Visual Assessment Methods: A Systematic Review.

Denture plaque, a biofilm that develops on denture surfaces, could contribute to many oral and systemic afflictions. Hence, a quantitative assessment of denture plaque is important to evaluate the denture hygiene of denture wearers, particularly to prevent plaque biofilm-associated diseases. The aim of this systematic review, therefore, was to review and summarize the visual denture hygiene assessment methods using denture plaque indices and with planimetries published in the literature. English language studies published up to March 2022 in four electronic databases, PubMed, Medline, Embase, and Cochrane Library, were searched, followed by a manual search of Google Scholar by two assessors. The review followed Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) whenever possible. Details of the visual assessment methods, including the types of denture assessed, its materials and its surfaces, as well as the use of a disclosing agent, were the main outcomes. Of 492 screened studies, 74 were included per the inclusion and exclusion criteria. Of these, 60 studies utilized various denture plaque indices while 18 used planimetries. 43 out of 60 studies with indices and 17 out of 18 studies with planimetries used disclosing agents for visual evaluation of plaque. A total of 21 indices were described in the included studies, of which seven graded a divided denture surface, while the remainder graded entire denture surface. Of the 18 planimetric assessments, one study quantified squares of the disclosed plaques on denture images, 16 studies quantified such pixels with computer programs, and a single study quantified points, pixels, and contour of plaque areas. In summary, denture plaque indices appear to be popular in denture plaque assessment due to their simplicity. Computerized planimetric assessment, though more time-consuming, provides a more accurate assessment of plaque load as it is less prone to subjectivity and assessor errors.

Patient-reported outcome measures (PROMs) of digital and conventional impression methods for fixed dentures.

BACKGROUND: Digital impression technique or computer-aided impression (CAI) has been recently concluded as a clinically acceptable alternative to conventional impression method (CIM) in the fabrication of crowns, short fixed partial dentures (FPDs), and implant-supported crowns. OBJECTIVE: The purpose of this study was to investigate the patients' opinion and subjective perception of two different ways of impression - digital and conventional. METHODS: A total of 45 patients were treated with CAI and CIM for the fabrication of tooth or implant-supported crowns. They fulfilled a questionnaire including 11 questions regarding the treatment time, gag reflex, discomfort related to manipulation, and other aspects of treatment. RESULTS: CAI was considered the preferential method for future treatment in 53% of patients, whereas 28.9% of the respondents preferred CIM. The preference for the impression method was influenced by the total time spent with the procedure, discomfort during manipulation with the tray or scanning head, size of the tray or scanning head, maximal opening discomfort, and (the tendency towards) gag reflex. CONCLUSION: CAI was considered a more comfortable and preferential method. Discomfort or difficulties during CAI negatively affected the patients' attitude to CAI, whereas the difficulties associated with CIM did not have any influence on the preferred method.

Denture use and risk for cardiometabolic disease: observational and Mendelian randomization analyses.

AIMS: Denture use may potentially increase the risk of cardiometabolic diseases (CMDs), but the casual relevance and strength of the associations are currently unknown. METHODS AND RESULTS: A total of 495 938 participants from the UK Biobank were included in the observational analyses. Linkage disequilibrium score (LDSC) regression and Mendelian randomization analyses were employed to estimate genetic correlation and the associations between the genetic liability for denture use with coronary artery disease, myocardial infarction, heart failure (HF), any stroke (AS), ischaemic stroke, haemorrhagic stroke, type 2 diabetes (T2D), and related clinical risk factors. In observational analysis, denture use was associated with 14-25% higher risks of various CMDs. The LDSC analysis found that denture use showed a positive genetic correlation with CMDs (rg 0.21-0.38). Genetic liability for denture use was associated with an elevated risk of HF [odds ratio: 1.49 (1.20-1.83)] and T2D [1.11 (1.01-1.24)]. By integrating genetic summary data of denture use with the sum of decayed, missing, and filled tooth surfaces (DMFS), a clinical measure of dental caries obtained from an independent source, genetically determined denture use/DMFS was also associated with an elevated risk of AS [1.21 (1.04-1.40)]. Furthermore, genetically predicted denture use/DMFS was significantly associated with established cardiometabolic risk factors, including HDL cholesterol, triglycerides, waist circumference, waist-to-hip ratio, and height. CONCLUSION: Our study supported potential causal associations between the genetic liability for denture use and risks for HF, AS, T2D, and related clinical risk factors. These findings may inform prevention and intervention strategies targeting dental diseases and CMDs.

This study examined the association of denture use with cardiometabolic diseases (CMDs) and related clinical risk factors through Mendelian randomization analyses using data from UK Biobank and published consortia. Genetic liability for denture use was associated with an 11­49% higher risk of heart failure, stroke, and type 2 diabetes.The potential causal relationship between denture use and CMDs was further strengthened by the associations of denture use with HDL cholesterol, triglycerides, waist circumference, waist-to-hip ratio, and height, which are among the major risk factors of CMDs.

Evaluation of photodynamic therapy efficacy vs. conventional antifungal therapy in patients with poor-fitting dentures suffering from denture stomatitis. A prospective clinical study.

BACKGROUND: The long-term use of antifungal therapy in denture stomatitis (DS) treatment could be accompanied by antifungal-resistant strain onset, leading to compromised therapeutic procedure and disease reappearance. Photodynamic therapy (PDT) has shown the ability to eradicate oral infections and resistance strains. This prospective clinical study aimed to assess the PDT's effectiveness compared to the conventional treatment on clinical and microbiological parameters in patients with DS without denture wear during the treatment and follow-ups. METHODS: Forty-two patients diagnosed with DS were randomly assigned to one-session single PDT application (test group) or conventional antifungal therapy (control group). Clinical and microbiological parameters were assessed and analyzed before and at 3rd, 15th, and 30th day following the treatments. Microbiological samples were analyzed by a Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The data was statistically analyzed. RESULTS: Prior to the treatment, Candida species, including C. albicans (100%), C. glabrata (33%), C. tropicalis (31%), C. krusei (31%) were isolated in all patients. Both treatment procedures demonstrated a statistically significant reduction in C. albicans at all follow-up time intervals (p < 0.05). However, PDT displayed a statistically significant reduction in C. krusei compared to the conventional treatment at all follow-up periods (p < 0.05). Clinical parameters improved considerably in the test group compared to the control group at the 3rd and 15th day of follow-up. CONCLUSION: One-session single PDT application demonstrated significant improvement in both clinical and microbiological outcomes in a short-term period, resulting in complete Candida spp. eradication compared to conventional antifungal therapy.

Influence of visual acuity, manual dexterity and handgrip strength on oral and denture hygiene ability of non-frail older people: Development of the Gerostomatological Assessment Battery.

BACKGROUND: Due to the heterogeneity of older people, it is difficult to identify reliable factors influencing oral health. OBJECTIVE: The aim was to illustrate the influence of visual acuity, manual dexterity, and handgrip strength on the oral and denture hygiene ability of older non-frail people. METHODS: In a cross-sectional study, conducted at a specialized dental clinic, at baseline, all participants received professional prophylaxis and instruction on daily oral and denture hygiene regimes for a 6-week intervention period. Data on the Quigley and Hein modified plaque index (QHI), respectively, the Denture Hygiene Index (DHI), visual acuity, manual dexterity and handgrip strength in non-frail participants (≥ 65 years) were collected. Recruitment was done within the clinic's patient clientele and within the staff (control cohort). RESULTS: Women showed significantly better manual dexterity than men (Mann-Whitney U, p = .01), while women's mean handgrip strength was significantly lower (Mann-Whitney U, p < .01). Manual dexterity (Mann-Whitney U, p = .003) and handgrip strength (Mann-Whitney U, p = .052) were associated with age. However, visual acuity, manual dexterity and handgrip strength had no influence on oral or denture hygiene. CONCLUSION: Visual acuity, manual dexterity and handgrip strength have no influence on oral and denture hygiene ability in older non-frail people. Further studies should investigate whether these factors also have no influence on oral and denture hygiene in vulnerable older patients. Therefore, an assessment tool for the evaluation of potential influencing factors of oral and denture hygiene is proposed in a dental context. This Gerostomatological Assessment Battery (G-AB) can be used as a helpful tool to check the individual cognitive function and comprehension, dental therapy approaches and their individual adaption.

Assessment of usefulness and reliability of YouTube™ videos on denture care.

INTRODUCTION: The world's population is in a demographic transition with a rising ageing population. Tooth loss is frequent among older people resulting in the replacement of natural teeth using complete or partial dentures. YouTube™ is the second most popular website in the world and is being increasingly used to access health care information. The aim of this study is to evaluate the usefulness and reliability of the information in YouTube™ videos regarding denture care. METHODS: The YouTube™ website was used to systematically search for videos using the keyword 'denture care'. Videos meeting the eligibility criteria were assessed separately by two independent researchers. The usefulness of the videos was assessed using the Global Quality Assessment Scale and a customized usefulness scoring scheme. Based on these scores, the usefulness of the videos was categorized as low, medium and high. A modified DISCERN tool (mDISCERN) was used for assessing reliability with scores ranging from 0 to 5. Other video characteristics like source/ownership of the videos, duration, views, likes, dislikes, number of days posted, like ratio, view ratio, interaction index and Video Power Index were also obtained. Statistical analysis was carried out using the Kruskal-Wallis test, Spearman correlation test and multiple linear regression analysis. RESULTS: A total of 120 videos were included. Based on the usefulness score, the usefulness of 65.8% of videos were classified as low, 32.5% were medium and 1.6% had high usefulness. The mDISCERN score for 74.2% of videos was 2 or below 2 indicating that the majority of videos had low reliability. Video characteristics did not differ significantly according to the usefulness of videos. Videos uploaded by dentists or dental hygienists had significantly higher usefulness scores (p < 0.001) in comparison to videos uploaded by other sources. However, reliability scores did not differ based on the sources of the videos. Video reliability was found to have a significant (B = 2.08, p < 0.001) positive association with video usefulness. CONCLUSION: YouTube™ cannot be recommended as the only source of information for denture care as most videos received low usefulness and reliability ratings in our study. Dentists and dental health professionals could take an active part in enhancing denture care-related content on YouTube™ and enable patients to have adequate and reliable knowledge of denture hygiene practices.

Novel biocompatible denture material incorporating type I collagen with improved functional properties for oral health.

The use of collagen is the recent development in various medical fields. Huge quantities of hide and skin trimmings are generated during the leather processing are wasted or underutilized. Trimmings contain collagen which can be beneficially extracted and utilized for high value products. Poly methyl methacrylate based denture materials exhibit serious concerns such as high porosity, presence of residual monomer, shrinkage, distortion and high rate of deterioration of the materials. This study aims to incorporate extracted Type I collagen with polymer to obtain denture base and investigate its chemical and mechanical properties. The present research methodology also reduces the quantity of monomer and acrylic resin usage. The collagen was extracted from animal skin and hide trimmings which are otherwise disposed as wastes. This study investigated the effect of visco-elastic characteristics of resulted specimens and their transition temperature, mechanical properties, decomposition temperature and leachability. The collagen-based specimens have better tensile strength with high decomposition temperature compared to control specimens. Scanning Electron Microscopy analysis revealed that the experimental specimens was cohesive and homogeneous which explained the higher tensile and decomposition values. The study suggests that collagen cross-linked acrylic denture base exhibit better mechanical and thermal resistance properties when compared to control specimens. The study indicates that biomaterials are emerging as smart products of value in human health.